Guaranteed Fitment
Always the right part
x
x
have questions?
Always the right part
Before 2pm EST*
Pre-made Gasket GU453
Retrofit Kit with optional Track to repair broken doors or missing tracks.
Recommended for Use With: Track 454
Color: Black
**IMPORTANT Notes**: This is a gasket and track retrofit kit for repairing broken or damaged doors. Can be used on reach-in doors or walk-in doors. Initially you will want to include the track with the gasket. We will pre-make the gasket to the exact measurements you specify and include enough track to accommodate the pre-made gasket. You will NEED to trim the track to the exact size you need and may want to cut the corners at 45 deg. angles. This is easiest to do with a small hack saw blade. In the future when replacing gasket on existing kit, track will not be needed.
TECH TIP: Use the Tag # field above for easy identification of your gaskets. Type a short note and we will make sure that information goes on the tag around the gasket!
Ordering is easy - Just specify above the exact outside edge to outside edge dimensions and if it is 3 or 4 sided gasket.
In Stock
Need additional help? Give us a call at (877) 442-7538 Monday-Friday 8am-5pm EST or via email [email protected].
We keep it simple: we offer a flat shipping rate of $9.99 for all online commercial gasket orders shipping to the continental USA. Special order OEM gaskets do not apply.
Yes, we can ship to Canada also! If the website doesn't provide you with a shipping quote on the spot while placing your order, give us a call or chat us online today for further assistance.
Protective Packaging: We pack our gaskets flat so that when you receive them there are minimal kinks or twists. Larger gaskets will be folded over so that they maintain their shape when you receive them.
Same Day Shipping: Place your on-line order today prior to 2pm EST and in most cases it will ship the same day! (*exceptions apply, i.e. large orders, special order items, silicone gaskets, etc) Our gaskets typically ship UPS ground, so they will arrive a few business days after you place your order depending on where in the country you live.
Sure Seal Promise Guarantee: Your gasket doesn't seal perfectly? No problem! We will exchange it without hassles within 30 days for FREE! Click here to find out more.
Corner Options
Standard
The most popular, the corners are square (90 degrees) and have been finshed so they are safe to handle.
Rounded
The corners are rounded at about a 1/2" radius. Typically people will round the corners if they walk past the board often in a commercial kitchen.
Unfinished (Saw Cut)
Not very common, there is no finishing and the corner is sharp.
Edge Options
Standard
The most popular, the edges of the board are square and have been finshed (deburred) so they are safe to handle.
Bullnose
We will round the edges so they are not square, often referred to as rounded.
Unfinished (Saw Cut)
Not very common, this is just like it says. No finishing, edges are sharp. Typically people use this option in custom applications.
Juice Grooves
Also commonly referred to as juice troughs, juice grooves are one of our most requested customizations. We simply route a small trough around the perimeter of your board to catch drippings from carving meat.
Number of Sides
4 Sided - Most common for refrigeration door gaskets. Gasket goes around all four sides of the door
3 Sided (2 Long, 1 Short) - Typically seen in cooler / freezer walk in doors. Walk in doors often have a door sweep at the bottom that replaces the bottom side of the door gasket
3 Sided (2 Short, 1 Long) - Least common for refrigeration door gaskets. Occasionally drawers gaskets have 3 sides
Short Side / Long Side
To custom make a gasket we need to know the outside edge dimensions of the gasket. For "Short Side", please measure the shorter of the two sides and enter the dimension into the drop downs. The whole number goes into the first drop down and the fraction goes into the second drop down. For "Long Side", please measure the longer of the two sides and enter the dimension into the drop downs. The whole number goes into the first drop down and the fraction goes into the second drop down. Make sure you're measuring outside edge dimensions of the gasket, from outside corner to outside corner.
